120AV
This top suction side discharge pump is designed
for semi-solid and high viscosity applications
and when equipped with in stock flow and/or pressure
controls allows the operator to adjust the delivery
of the pump from maximum down to zero without
the need of changing pump shaft speed. In so doing
the pump is capable of handling wide ranges in
viscosity from grease, adhesives, oil additives,
compounds, coatings and the like even down to
near water thin liquids. List
/ Compare | Specify,
Then Quote
120AX
With its "Onboard" bypass relief valve
designed to bypass the fully volume of viscous
pumpages to provide temporary protection to the
pump and discharge system, along with its full
throated 4" top suction flanged port this
pump is a natural for many of the most demanding
applications where due to the viscosity a recirculating
valve and the additional piping back to the supply
tank are impractical and costly. For
additional details see description under Model
20DX. List
/ Compare | Specify,
Then Quote
120A
If accuracy in delivery of a thick, even semi-solid,
liquid is your challenge this fixed displacement
pump is your ticket to success. It can even
eliminate the need for a flow meter. When driven
with a "VFD" can give you repeatable
accuracy to within 1/10th of 1% through a properly
designed
piping system. And will even be able to pass
inclusions/particles when equipped with a "Stroked"
head. List
/ Compare | Specify,
Then Quote
Contact/RFQ 
