Search Our Catalog
 
 
 
GO
 Use trailing wildcard (*) for broader results
   
  Download Tri-Rotor's
8-page Company Brochure
(PDF, 908kb)
  Tri-Rotor Pumps are made in USA!

Design Flexibility • Engineering Assistance
Most Pumps in Stock for Immediate Shipment

Rotary Piston Pump
Up to 80 GPM - Series 80

Rotary Piston Pumps Up to 80 GPM - Series 80

80BV
This series is equipped with four 2 inch NPT ports. Two suction ports and two discharge ports located at right angles. Standard configuration is side suction with top discharge (side in top out). The four port design accommodates side in side out, top in side out or top in top out arrangements. It also allows two different suction lines and two separate discharge lines. Couple the port flexibility with the variable volume attributes of the "V-Head" design results in complete adaptability. If required one pump could actually deliver two compatible liquids of different viscosities to two different locations.
List / Compare
| Specify, Then Quote

80BX
Originally designed for the demanding "Truck" pump sector it has found countless applications in the industrial and commercial marketplaces, being that it will not chew, aerate or foam the material pumped as is the case with all Tri-Rotor pumps. And with only three moving parts, within the pumping chamber, yields continuous discharge pressure and steady flow rate. For additional details see description under Model 20DX.
List / Compare | Specify, Then Quote

80B
The need for an open discharge pump for 88 GPM (40SSU/4CpS) down to 15 GPM (100,000 SSU/21,625 CpS) is brought to a whole new level with its "4" port design. Rotation is not a problem being that it is completely reversible in the field. For the purpose of stripping the lines the pump may be run backwards or if the ports are equipped with quick disconnects the piping can be easily changed eliminating the need to run the pump in reverse.
List / Compare | Specify, Then Quote

Mounted Unit Drawings
Series 80 / Belt Driven (J6011)
Series 80 / Gear Motor / Direct Connect (J6093)
Model 80BX / Inline But Offset Helical Gear Reducer (J6026)
Model 80BV / Inline But Offset Helical Gear Reducer (J6027)